Daikin FFQ25BV1B - Page 319

ESIE05-04 Disassembly and Maintenance
Part 5 – Disassembly and Maintenance 5–69
3
5
1
5
6 Put the heat exchanger
partition plate inside and
fix them with two screws.
7 Pass the thermistor ass'y
through the clamps and
the slit of partition plate
securely as the original
state.
Pass the lead wire of
motor also through the
clamp securely.
8 Insert the grounding
terminal to the header.
Step Procedure Points
(S2672)
Heat exchanger
partition plate
Fan motor lead wire
Clamp
Clamps
Slit of partition plate
Fan motor lead wire
Thermistor ass'y
(S2683)
(S268
4)