ESIE05-04 Disassembly and Maintenance
Part 5 – Disassembly and Maintenance 5–129
1.16.6 Removal of Fan Motor
Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure:
Step Procedure Points
Q Remove side panels and
other external casing, and
electrical parts box according
to their removal procedures.
Use 2.5 mm hexagon nut driver.
1 Loosen the hexagon set
screw fastening the fan
rotor and fan motor.
2 Remove the fan motor
fastener. (3 screws)
3 Remove the fan motor.
To Next Page
Loading...
