RA Indoor Unit SiBE121135
140 Operation Manual
Turn the breaker on
To set the clock
1.
Press .
2.
Press to set the current day of the week.
3.
Press .
• “ ” blinks.
4.
Press to set the clock to the present time.
• Holding down or rapidly increases or decreases the time display.
5.
Press .
• Point the remote controller at the indoor unit when pressing the buttons.
• “ ” blinks.
NOTE
Note on setting the clock
• If the indoor unit’s internal clock is not set to the correct time, the ON TIMER, OFF TIMER and WEEKLY TIMER will not operate punctually.
• After the power is turned on, the flap of the indoor unit opens and closes once to set the
reference position.
• “ ” is displayed on the LCD.
• “ ” and “ ” blink.
To Next Page
Loading...
