SiBE121135 RA Indoor Unit
Operation Manual 221
2.3.3 AUTO · DRY · COOL · HEAT · FAN Operation
AUTO · DRY · COOL · HEAT · FAN Operation
: AUTO
: DRY
: COOL
: HEAT
:FAN
DRY or FAN mode AUTO or COOL or HEAT mode
The temperature setting is not variable.
Set to the temperature you like.
VE
2, 3
1
4
5
<FLKS>
<FLXS>
C
The air conditioner operates with the operation mode of
your choice.
From the next time on, the air conditioner will operate
with the same operation mode.
Press “ ” to raise the temperature and press
“ ” to lower the temperature.
To start operation
To stop operation
To change the temperature setting
1. Press “MODE selector button”
and select a operation mode.
•
Each pressing of the button advances the
mode setting in sequence.
2. Press “ON/OFF button”.
•
The OPERATION lamp lights up.
3. Press “ON/OFF button” again.
•
Then OPERATION lamp goes off.
4. Press “TEMPERATURE adjustment button”.
To Next Page
Loading...
