SiBE121135 RA Indoor Unit
Operation Manual 227
2.3.7 HOME LEAVE Operation
HOME LEAVE Operation
Before using HOME LEAVE operation.
C
1, 2
Initial setting Selectable range
temperature Air flow rate temperature Air flow rate
Cooling 25
°
C “ ” 18-32
°
C 5 step, “ ” and “ ”
Heating 25
°
C “ ” 10-30
°
C 5 step, “ ” and “ ”
HOME LEAVE operation is a function which allows you to record
your preferred temperature and air flow rate settings.
Home leave operation will run with these settings the next time you use the unit. To change
the recorded information, repeat steps 1 – 3.
To start HOME LEAVE
operation
To cancel HOME LEAVE
operation
2. Press “HOME LEAVE button” again.
• The HOME LEAVE lamp goes off.
1. Press “HOME LEAVE button” .
• The HOME LEAVE lamp lights up.
To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air
flow rate for HOME LEAVE operation. Record your preferred temperature and air flow rate.
1. Press “HOME LEAVE button”. Make sure “ ” is displayed in the remote
controller display.
2. Adjust the set temperature with “ ” or “ ” as you like.
3. Adjust the air flow rate with “FAN” setting button as you like.
To Next Page
Loading...
