Why is my Daikin FT25GV1G cooling effect poor?
A weak cooling effect may be due to several reasons. Check if the air filters are clean and ensure that nothing is blocking the air inlet or outlet of either the indoor or outdoor units. Verify that the temperature setting is appropriate, all windows and doors are closed, and the airflow rate and direction are correctly set.
What to do if my Daikin Air Conditioner operation stops suddenly and the OPERATION lamp flashes?
If the operation of your Daikin Air Conditioner suddenly stops and the OPERATION lamp is flashing, check if the air filters are clean and inspect the air inlet and outlet of both indoor and outdoor units for any obstructions. Clean the filters or remove any obstacles, then turn the breaker OFF and back ON. After that, try operating the air conditioner using the remote controller.
What to do if my Daikin Air Conditioner does not operate and the OPERATION lamp is off?
If your Daikin Air Conditioner isn't operating and the OPERATION lamp is off, check the following: ensure that a breaker hasn’t been turned OFF or a fuse hasn’t blown, verify there isn't a power failure, confirm that batteries are correctly installed in the remote controller, and ensure the timer setting is correct.
What to do if the Daikin FT25GV1G Air Conditioner operation stopped suddenly and the OPERATION lamp is on?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is on, it might be due to a large voltage fluctuation, which triggers a system protection mechanism. The unit will automatically resume operation in about 3 minutes.
How to fix Daikin Air Conditioner remote controller with no signals, low sensitivity, low contrast, or display out of control?
If you're experiencing issues with your Daikin Air Conditioner remote controller such as no displayed signals, low sensitivity, low contrast, a blacked-out display, or the display running out of control, the batteries may be weak or the remote controller may be malfunctioning. Replace all the batteries with new AAA alkaline batteries. If a reset button is available, press it after replacing the batteries.
Key safety warnings and guidelines for operating the air conditioner safely.
Detailed identification of indoor and outdoor unit components and remote controller parts.
Instructions for setting up the remote controller and initial unit preparation.
How to select and use the DRY, COOL, and FAN operating modes.
Adjusting horizontal flaps and vertical louvers for desired airflow direction.
Utilizing the powerful mode for rapid cooling or heating effect.
Setting ON and OFF timers for automated air conditioner operation.
Steps for cleaning the indoor unit, outdoor unit, and remote controller.
Guidance on cleaning and replacing air filters for optimal performance.
Explanations for situations that may appear unusual but are normal operations.
User checks to perform before contacting a service technician for issues.
When to call service and recommendations for regular professional maintenance.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Noise Level (Outdoor) | 48 dB(A) |
| Refrigerant | R410A |
| Indoor Unit Weight | 9 kg |
| Outdoor Unit Weight | 28 kg |
| Type | Split Air Conditioner |
| Power Supply | 220-240V / 50Hz |
To Next Page
