What to do if my Daikin Air Conditioner operation stopped suddenly?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is on, it might be due to a large voltage fluctuation, which triggers system protection. The unit will automatically resume operation in about 3 minutes.
Why is my Daikin FT25DVM Air Conditioner outdoor unit leaking water?
The water or steam emitted from the outdoor unit of your Daikin Air Conditioner is due to moisture in the air condensing on the cool surface of the outdoor unit's piping, which then drips as water.
Why does mist come out of my Daikin Air Conditioner?
The mist coming out of your Daikin Air Conditioner indoor unit happens when the cold airflow cools the room air, causing it to condense into mist during cooling operation.
How to get rid of the odor from Daikin Air Conditioner?
If your Daikin Air Conditioner indoor unit gives out an odor, it is recommended to have the indoor unit professionally cleaned by a technician. Consult the service shop where you bought the air conditioner.
Why does my Daikin Air Conditioner not start right away?
If your Daikin Air Conditioner doesn't start immediately after pressing the ON/OFF button soon after stopping it or reselecting the mode, this is normal. You should wait approximately 3 minutes for the system to restart.
Why is the Daikin Air Conditioner outdoor fan running when it's off?
The outdoor fan in your Daikin Air Conditioner may continue rotating for about 60 seconds after operation stops to protect the system. Additionally, if the outdoor temperature is very high, the fan might start rotating even when the air conditioner is not in operation, also for system protection.
General| Brand | Daikin |
|---|---|
| Model | FT25DVM |
| Category | Air Conditioner |
| Language | English |
Detailed technical specifications for various indoor and outdoor Daikin D-Series models.
Diagrams illustrating connector layouts for indoor and outdoor PCBs.
Important precautions and guidelines before performing diagnosis.
Troubleshooting guide based on common symptoms and check items.
Detailed troubleshooting steps for various error codes and malfunctions.
Procedures for checking specific components like fan motors and PCBs.
To Next Page
