What to do if my Daikin Air Conditioner unit does not operate?
If your Daikin Air Conditioner unit is not operating, first check the power supply, ensuring there is no power failure or blown fuse. Next, verify that the power plug is securely connected. Also, check the delay timer settings to ensure they are correct. If the problem continues after these checks, it is recommended to contact the air conditioner unit installer.
How to increase air flow in my Daikin Air Conditioner?
If the airflow from your Daikin Air Conditioner is too low, start by cleaning or replacing the air filter. Ensure all doors and windows are closed to prevent drafts. Check for and clear any clogs in the air suction and discharge. Finally, adjust the regulated temperature to a higher setting.
How to get rid of bad odor from Daikin Air Conditioner?
If your Daikin Air Conditioner has a bad odor, it may be caused by particles like cigarettes, smoke, or perfume adhered to the coil. Clean the coil to remove these odors.
Why is there condensation on my Daikin FT20FV1M?
Condensation on the front air grille of your Daikin Air Conditioner indoor unit is typically due to air humidity after prolonged operation. To resolve this, increase the temperature setting and operate the unit at a high fan speed.
What is the reason for hissing sound from Daikin FT20FV1M Air Conditioner?
It is normal to hear a hissing sound from your Daikin Air Conditioner during operation, which is caused by refrigerant fluid flowing into the evaporator coil.
General| Cooling Capacity | 2.0 kW |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 730 x 284 x 213 mm |
| Outdoor Unit Dimensions (W x H x D) | 695 x 418 x 244 mm |
| Power Consumption (Cooling) | 0.57 kW |
| Indoor Unit Weight | 8 kg |
| Outdoor Unit Weight | 28 kg |
Provides critical safety warnings and cautions for installation and operation.
Details required clearances and considerations for outdoor unit placement.
Steps for cutting, flaring, and connecting refrigerant pipes, including tools needed.
Procedure for removing air and moisture from the refrigerant lines.
Lists common faults, their causes, and recommended actions.
To Next Page
