Daikin FT20LV14 User Manual

REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Non-Inverter
Wall Mounted Type
1.5/2.0/2.5/3.5 kW Class
Si041265EC

Daikin FT20LV14 Specifications

General

Brand	Daikin
Model	FT20LV14
Category	Air Conditioner
Language	English

Summary

Horizontal and Vertical Blades Removal

Remove Horizontal Blades

Detailed steps for removing horizontal blades, including shaft manipulation and reassembly tips.

Remove Vertical Blade Assemblies

Procedure to unfasten hooks and remove vertical blade assemblies, noting fin count and marking.

Electrical Box, PCBs, and Swing Motor Removal

Remove Electrical Box Assembly

Steps to remove the electrical box, including disconnecting wires and securing hooks.

Disconnect Connectors and Thermistor

Access Electrical Box Components

Remove Signal Receiver PCB

Remove Control PCB and Swing Motor

Disconnecting PCB connectors, removing the control PCB, and detaching the swing motor.

Indoor Heat Exchanger Removal

Remove Heat Exchanger Mounting Screws

Disconnect Drain Hose and Piping

Procedure for disconnecting the drain hose, gas and liquid refrigerant piping.

Remove Indoor Unit from Plate

Procedure to lift and remove the entire indoor unit from its mounting plate.

Release Auxiliary Piping and Hooks

Fan Motor and Fan Rotor Removal

Remove Side Plates and Screws

Remove Fan Motor and Rotor