Daikin FTK24BXVJU - Indoor Installation Guideline; Installing the Mounting Plate

1-6
INDOOR INSTALLATION GUIDELINE
1 INSTALLING THE MOUNTING PLATE
• The mounting plate should be installed on a wall which
can support the weight of the indoor unit.
1) Temporarily secure the mounting plate to the wall,
make sure that the panel is completely level, and mark
the drilling points on the wall.
2) Secure the mounting plate to the wall with screws of
size #8 x 1” (M4 x 25mm).
Recommended mounting plate retention
spots and dimensions
Mounting plate
fixing screw
The mounting plate
should be installed
on a wall which can
support the weight of
the indoor unit.
Mounting plate
INDOOR UNIT FTX(B)/FTK 09/12
E
B
C
A
HI
GH
CB
D
Ø 2-9/16
(65)
Ø 2-9/16
(65)
F
 Recommended mounting plate
retention spots (7 spots in all)
Place a leveler on these tabs.
Use a tape measure as shown.
Position the end of the tape
measure at 
Through-the-wall
hole Ø 65mm
Drain hose
position
All dimensions are in inch (mm)
INDOOR UNIT FTX(B)/FTK 18/24
BC
H
I
A
F
D
Ø 2-9/16
(65)
E
BC
GH
Ø 2-9/16
(65)
 Recommended mounting plate
retention spots (7 spots in all)
Place a leveler on these tabs.
Use a tape measure as shown.
Position the end of the tape
measure at

Through-the-wall
hole Ø 65mm
Drain hose position
Dimension
Model
ABCDEFGH I
09/12
30-5/16
(770)
9-1/2
(241.6)
1-13/16
(46.4)
4-5/8
(117)
4-9/16
(116.5)
1-15/16
(49.5)
1-15/16
(49.5)
6-5/8
(170)
1-15/16
(50)
18/24
39
(990)
9-15/16
(251.6)
1-3/4
(45.4)
4-5/8
(117)
5
(126.5)
1-15/16
(49.5)
2-9/16
(65.5)
6-5/8
(170)
2-3/8
(60)
All dimensions are in inch (mm)
01_IM-FTX&FTK-DAIKIN_3P601788-2 G-EN.indb 601_IM-FTX&FTK-DAIKIN_3P601788-2 G-EN.indb 6 14/10/2022 10:25:02 AM14/10/2022 10:25:02 AM