To Next Page

To Previous Page

HOME LEAVE Operation

HOME LEAVE operation is a function which allows you to record your preferred temperature and air

flow rate settings.

■ To start HOME LEAVE

operation

1. Press “HOME LEAVE button”.

• “ ” is displayed on the LCD.

• The HOME LEAVE lamp lights up.

■ To cancel HOME LEAVE

operation

2. Press “HOME LEAVE button” again.

• “ ” disappears from the LCD.

• The HOME LEAVE lamp goes off.

Before using HOME LEAVE operation.

■

To set the temperature and air flow rate for HOME LEAVE operation

When using HOME LEAVE operation for the first time, please set the temperature and air flow rate

for HOME LEAVE operation. Record your preferred temperature and air flow rate.

1. Press “HOME LEAVE button”. Make sure “ ” is displayed in the remote

controller display.

2. Adjust the set temperature with “ ” or “ ” as you like.

3. Adjust the air flow rate with “FAN” setting button as you like.

Home leave operation will run with these settings the next time you use the unit. To change

the recorded information, repeat steps 1 – 3.

TIMER

CANCEL

OFF

1, 2

Initial setting Selectable range

temperature Air flow rate temperature Air flow rate

Cooling 25

C“”18-32

C 5 step, “ ” and

“”

Heating 25

C“”10-30

C 5 step, “ ” and

“”

01_EN_3P192025-2.fm Page 16 Wednesday, October 11, 2006 4:17 PM

Daikin FTKD50FVM User Manual

Questions and Answers: