To Next PageTo Next PageWhat to do if Daikin FTKS25CAVMB Air Conditioner operation stops suddenly and the OPERATION lamp flashes?
If the Daikin Air Conditioner operation stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstructions. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner.
What to do if Daikin FTKS25CAVMB Air Conditioner operation stopped suddenly (OPERATION lamp is on)?
If the Daikin Air Conditioner operation stopped suddenly and the OPERATION lamp is on, it will automatically resume operation in about 3 minutes.
Why is my Daikin Air Conditioner outdoor unit leaking water?
In HEAT mode, the frost on the outdoor unit melts into water or steam during defrost operation. In COOL or DRY mode, moisture in the air condenses into water on the cool surface of the outdoor unit piping and drips.
Why is the cooling or heating effect poor in my Daikin FTKS25CAVMB?
If the cooling or heating effect of your Daikin Air Conditioner is poor, check whether the air filters are clean.
How to stop Daikin FTKS25CAVMB Air Conditioner indoor unit from giving out odor?
If your Daikin Air Conditioner's indoor unit gives out an odor, it is recommended to have the indoor unit cleaned by a technician.
Why hot air does not flow out soon after the start of heating operation in Daikin Air Conditioner?
After starting the heating operation of your Daikin Air Conditioner, you should wait for 1 to 4 minutes for hot air to flow out.
Why Daikin FTKS25CAVMB operation does not start soon?
You should wait for about 3 minutes for the Daikin Air Conditioner operation to start.
Why does my Daikin FTKS25CAVMB smell?
The Daikin Air Conditioner may emit odors because smells from the room, furniture, or cigarettes have been absorbed into the unit and are being discharged with the airflow. It is recommended to have the indoor unit cleaned by a technician. Consult the service shop where you bought the air conditioner.
What to do if my Daikin Air Conditioner heating stops suddenly?
The system is likely removing frost from the outdoor unit. You should wait for about 3 to 8 minutes.
Why doesn't hot air come out immediately from my Daikin Air Conditioner when heating?
You should wait for 1 to 4 minutes. The system is designed to start discharging air only after it has reached a certain temperature.
General| Brand | Daikin |
|---|---|
| Model | FTKS25CAVMB |
| Category | Air Conditioner |
| Language | English |
Guide to adjusting the horizontal louvers for optimal air direction.
How to activate and deactivate the quick cooling/heating function.
Steps to start and cancel the quiet operation mode for the outdoor unit.
Procedures to initiate and stop the Home Leave feature.
How to set preferred temperature and airflow for the Home Leave function.
How to activate and deactivate the sensor-based energy saving feature.
Steps to set the air conditioner to turn off automatically.
How to deactivate a previously set OFF timer.
Guidelines for operating multiple indoor units with one outdoor unit.
Information on the quiet operation feature for night time use in multi systems.
How to use the outdoor unit quiet mode across multiple indoor units.
Feature to enforce a single cooling or heating mode across all connected units.
How the priority room setting affects operation modes in a multi-system.
How the priority room setting impacts powerful operation.
How the priority room setting influences quiet operation.
General guidance for cleaning the air conditioner's main components and front panel.
Procedures for cleaning or replacing the main air filters.
Instructions for maintaining the photocatalytic deodorizing air purifying filters.
Essential checks before operating the air conditioner.
Steps to take before storing the unit for extended non-use.
Guidelines for environmentally sound disposal of the air conditioner and its components.
Advice on scheduling professional maintenance for optimal performance.
Details about the refrigerant used, including GWP and inspection requirements.
How to use the remote controller to diagnose system errors using error codes.
