What to do if Daikin FTKS25GVMA operation stops suddenly and OPERATION lamp flashes?
If your Daikin air conditioner stops suddenly and the OPERATION lamp flashes, try cleaning the air filters or removing any obstacles. After that, turn the breaker OFF, then turn it ON again, and try operating the air conditioner with the remote controller.
How to improve cooling or heating effect of Daikin Air Conditioner?
If the cooling or heating effect of your Daikin air conditioner is poor, check if the air filters are clean. Cleaning them may improve the performance.
How to remove odour from Daikin FTKS25GVMA Air Conditioner indoor unit?
We recommend you to have the indoor unit of your Daikin air conditioner washed by a technician.
Why does the outdoor fan of Daikin FTKS25GVMA Air Conditioner rotate when it is not in operation?
The outdoor fan of your Daikin air conditioner continues rotating for another 60 seconds for system protection, even when the air conditioner is not in operation.
What to do if Daikin FTKS25GVMA Air Conditioner operation stopped suddenly but the OPERATION lamp is on?
If the operation of your Daikin air conditioner stopped suddenly, but the OPERATION lamp is on, it will automatically resume operation in about 3 minutes.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Outdoor Unit Noise Level | 48 dB(A) |
| Indoor Unit Weight | 9 kg |
| Power Supply | 220-240 V, 50 Hz |
| Type | Split System Air Conditioner |
| Refrigerant | R-32 |
Keep manual accessible, read attentively, follow WARNING/CAUTION.
Defines WARNING (severe) and CAUTION (minor) hazards.
Precautions against fire, explosion, shock, and proper earthing.
Site selection, drainage, electrical work, and relocation advice.
Identifies key components of both units.
Explains specific parts like filters, sensors, flaps, and louvres.
Signal transmitter, display, and basic button functions.
Controls for operation modes, fan speed, swing, and timers.
Step-by-step guide for battery installation.
Proper usage, distance, holder mounting, and precautions.
Procedures for setting the clock and initial power activation.
How to select and start different operation modes.
How to change temperature and fan speed settings.
How to adjust horizontal flaps and vertical louvres.
How to activate and cancel for maximum cooling/heating effect.
How to activate and cancel for reduced outdoor unit noise.
How to activate and cancel for efficient power consumption.
How to activate and cancel for indoor unit humidity control.
How to activate and cancel for sensor-based operation.
How INTELLIGENT EYE contributes to energy savings.
Setting and cancelling OFF TIMER, NIGHT SET MODE, and ON TIMER.
Example of setting both ON and OFF timers simultaneously.
Defines multi-systems and rules for mode selection.
NIGHT QUIET, QUIET, and Mode Lock for multi-systems.
How priority room settings affect operation modes and features.
Instructions for cleaning unit surfaces and the front panel.
How to clean air filters and maintain the photocatalytic filter.
Procedures for storing the unit for extended periods.
Explains common issues like start delays, heating warm-up, defrosting.
Explains mist, water/steam, odors, and checks before calling service.
Critical symptoms requiring service and periodic maintenance advice.
To Next Page
