What to do if Daikin FTKS60GVMA does not operate and OPERATION lamp is off?
If your Daikin Air Conditioner isn't working and the OPERATION lamp is off, check a few things: first, see if a breaker has tripped or a fuse has blown. Next, verify whether there's a power failure in your area. Also, make sure that batteries are correctly installed in the remote controller, and confirm that the timer setting is accurate.
What to do if Daikin FTKS60GVMA Air Conditioner operation stops suddenly and OPERATION lamp flashes?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, check if the air filters are clean and whether anything is blocking the air inlet or outlet of the indoor and outdoor units. Clean the air filters or remove any obstacles, then turn the breaker OFF. Also, ensure that the operation modes are the same for all indoor units connected to the outdoor units in the multi system.
Why Daikin FTKS60GVMA operation does not start soon?
If your Daikin Air Conditioner doesn't start immediately, please wait for about 3 minutes.
Why hot air does not flow out soon after the start of heating operation of Daikin Air Conditioner?
If hot air does not flow out immediately after starting the heating operation of your Daikin Air Conditioner, allow 1 to 4 minutes for the hot air to begin flowing.
Why mist comes out of the indoor unit of Daikin Air Conditioner?
Mist may come out of the indoor unit of your Daikin Air Conditioner when the air in the room is cooled into mist by the cold airflow during cooling operation.
What to do if Daikin FTKS60GVMA operation stopped suddenly and OPERATION lamp is on?
If your Daikin Air Conditioner operation stopped suddenly but the OPERATION lamp is still on, it should automatically resume operation in about 3 minutes.
What to do if abnormal functioning happens during Daikin FTKS60GVMA Air Conditioner operation?
If you experience abnormal functioning during the operation of your Daikin Air Conditioner, try turning the breaker OFF, then turn it back ON, and attempt to operate the air conditioner using the remote controller.
Why the outdoor fan rotates while Daikin FTKS60GVMA Air Conditioner is not in operation?
If the outdoor fan of your Daikin Air Conditioner is rotating even when the unit is not in operation, it could be for system protection when the outdoor temperature is very high.
Why the heating operation stops suddenly and a flowing sound is heard in Daikin Air Conditioner?
If the heating operation of your Daikin Air Conditioner stops suddenly and you hear a flowing sound, please wait for about 4 to 12 minutes.
General| Cooling Capacity | 6.0 kW |
|---|---|
| Heating Capacity | 7.0 kW |
| Refrigerant | R32 |
| Type | Split System |
| Power Supply | 220-240 V, 50 Hz |
Details the parts of the indoor unit, including filters, sensors, and louvers.
Details the parts of the outdoor unit, including air inlets, outlets, and piping.
Details the parts of the remote controller, including buttons and display.
Instructions on how to insert batteries into the remote controller.
Guidance on proper use, distance, and interference for the remote controller.
Steps for securely installing the remote controller holder on a wall.
Explains how to start, stop, and change the operation modes (AUTO, DRY, COOL, HEAT, FAN).
Instructions for adjusting the horizontal flap and vertical louvers for optimal airflow.
How to activate and cancel the POWERFUL mode for maximum cooling/heating effect.
How to activate and cancel the quiet mode for the outdoor unit, reducing noise.
Setting and using the HOME LEAVE function to record preferred temperature and airflow settings.
Using the infrared sensor to detect human movement for energy-saving operations.
Setting ON and OFF timers for automatic air conditioner operation.
Specific considerations for multi-system installations, including operation mode priority.
Instructions for cleaning the indoor unit, outdoor unit, and remote controller.
Detailed steps for cleaning and replacing air filters and the photocatalytic filter.
Lists common operational issues and their explanations, suggesting continued use.
Guides users through checks to perform before contacting a repair person.
Identifies critical symptoms that require immediate service call.
To Next Page
