EasyManua.ls Logo

Daikin FTM28NV2S - User Manual

Daikin FTM28NV2S
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
6.0/7.0/7.1/8.0/8.5/9.0/9.5 kW Class
28000/30000/32000/33000/36000 Btu/h Class
Si041352ED
Question and Answer IconNeed help?

Do you have a question about the Daikin FTM28NV2S and is the answer not in the manual?

Summary

Air Filters and Front Panel Removal

Front Grille Removal

Remove Service Cover

Steps to remove the service cover before accessing the front grille.

Electrical Box Removal

PCBs Removal

Remove Signal Receiver PCB

Steps to remove the signal receiver PCB, including its shield plate.

Horizontal Blades Removal

Release Horizontal Blade Shafts

Procedure for releasing the right, left, inner right, and inner left shafts.

Swing Motors Removal

Remove Swing Motors for Horizontal Blades

Procedure for removing the swing motors that control horizontal blades.

Fan Motor Removal (Without Heat Exchanger)

Loosen Fan Motor Fixing Plate Screws

Procedure for loosening screws on the upper fan motor fixing plate.

Indoor Heat Exchanger Removal

Disconnect Drain Hose

Procedure for pulling out and disconnecting the drain hose.

Fan Motor and Fan Rotor Removal

Daikin FTM28NV2S Specifications

General IconGeneral
Cooling Capacity2.8 kW
Power Supply220-240 V, 50 Hz
RefrigerantR32
Dimensions (Indoor Unit)770 x 285 x 223 mm
Indoor Unit Dimensions (WxHxD)770 x 285 x 223 mm
TypeWall Mounted

Related product manuals