Need help?Do you have a question about the Daikin FTX18NMVJU and is the answer not in the manual?
Procedures for removing standard and optional air filters from the indoor unit.
Steps to release shafts and detach the front panel from the unit.
Procedure for unscrewing, unhooking, and removing the front grille.
Steps to release center, left, and right shafts to remove horizontal blades.
Procedure for safely disconnecting the main connecting wire from the terminal board.
Steps to remove the electrical box, including wires and connections.
Procedure for removing the swing motor assembly from the unit.
Steps to disconnect terminals and remove the main control printed circuit board.
Procedure for disconnecting the connector and removing the filter printed circuit board.
Steps to release harness and remove the display printed circuit board.
Procedure for safely disconnecting refrigerant piping before heat exchanger removal.
Steps to detach the unit from the plate and remove the indoor heat exchanger.
Steps to remove the right side plate, fan rotor, and fan motor.
Procedure for removing the fan guards from the unit.
Procedure for removing the vertical blade assemblies.
Procedures for removing standard and optional air filters from the indoor unit.
Steps to release shafts and detach the front panel from the unit.
Procedure for unscrewing, unhooking, and removing the front grille.
Steps to release center, left, and right shafts to remove horizontal blades.
Procedure for safely disconnecting the main connecting wire from the terminal board.
Steps to remove the electrical box, including wires and connections.
Procedure for removing the swing motor assembly from the unit.
Steps to disconnect terminals and remove the main control printed circuit board.
Procedure for disconnecting the connector and removing the filter printed circuit board.
Steps to release harness and remove the display printed circuit board.
Procedure for safely disconnecting refrigerant piping before heat exchanger removal.
Steps to detach the unit from the plate and remove the indoor heat exchanger.
Steps to remove the right side plate, fan rotor, and fan motor.
Procedure for removing the fan guards from the unit.
Procedure for removing the vertical blade assemblies.
General| Brand | Daikin |
|---|---|
| Model | FTX18NMVJU |
| Category | Air Conditioner |
| Language | English |
To Next Page
