What to do if Daikin FTX20J3V1B operation stops suddenly and the OPERATION lamp flashes?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, clean the air filters or remove any obstacles. Then, turn the breaker OFF, and then turn it ON again. Try operating the air conditioner with the remote controller.
General| Cooling Capacity | 2.0 kW |
|---|---|
| Heating Capacity | 2.5 kW |
| Weight (Indoor Unit) | 8.5 kg |
| Indoor Unit Weight | 8.5 kg |
| Type | Split System |
| Refrigerant | R32 |
| Power Supply | 220-240V / 50Hz |
Covers WARNING and CAUTION statements for safe operation and property protection.
Details on suitable installation locations and drainage requirements.
Guidance on electrical work, dedicated circuits, and system relocation.
Considerations for minimizing noise nuisance and environmental impact.
Identification of parts on the indoor unit with a diagram.
Identification of parts on the outdoor unit with a diagram.
Explanation of the remote controller's buttons, display, and signal transmitter.
Instructions for inserting and handling batteries for the remote controller.
Guidance on operating the remote controller and fixing its holder on the wall.
Steps to set the unit's clock and turn on the main breaker.
Recommendations for energy efficiency and important usage notes.
How to turn the unit on/off and adjust temperature settings.
Adjusting fan speed and understanding notes for HEAT, COOL, DRY, AUTO modes.
How to adjust the flap (horizontal) and louvers (vertical) for airflow direction.
Activating COMFORT AIRFLOW, cancellation, and flap/louver angle details.
How to activate and deactivate the POWERFUL operation and its notes.
How to enable/disable ECONO operation for energy efficiency and its notes.
Setting and cancelling the OFF timer, including NIGHT SET MODE.
Setting the ON timer, combining timers, and attention points.
Instructions for cleaning the unit's body and the removable front panel.
Procedures for cleaning standard air filters and photocatalytic air-purifying filters.
Routine maintenance, system checks, and preparation for long periods of non-use.
Descriptions of common occurrences that are not actual malfunctions.
A checklist for common operational problems before contacting a repair person.
Symptoms requiring service, disposal guidelines, and refrigerant info.
How to access and interpret fault codes displayed on the remote controller.
To Next Page