What to do if my Daikin FTX60GV1B Air Conditioner operation stops suddenly and OPERATION lamp flashes?
If the Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, clean the air filters or remove any obstructions. Then, turn the breaker OFF, and then turn it back ON. Try operating the air conditioner again using the remote controller.
Why does my Daikin FTX60GV1B outdoor unit emit water or steam?
The outdoor unit of your Daikin Air Conditioner emits water or steam in HEAT mode when the frost on the outdoor unit melts into water or steam during defrost operation.
Why does my Daikin Air Conditioner operation stop suddenly and the OPERATION lamp is on?
The Daikin Air Conditioner might stop operating due to a sudden large voltage fluctuation. It will automatically resume operation in about 3 minutes.
Why does mist come out of my Daikin FTX60GV1B indoor unit?
Mist coming from the indoor unit of your Daikin Air Conditioner happens when the air in the room is cooled into mist by the cold airflow during cooling operation.
What to do if my Daikin FTX60GV1B Air Conditioner indoor unit gives out odour?
If the indoor unit of your Daikin Air Conditioner emits an odor, it is recommended to have the indoor unit cleaned by a technician. Consult the service shop where you bought the air conditioner.
Essential safety guidelines, warnings, and cautions for operating the air conditioner.
Detailed warnings regarding fire, electric shock, injury, and health hazards.
Identification and description of the indoor unit's various parts and indicators.
Identification and description of the outdoor unit's various components and connections.
Step-by-step instructions for inserting batteries into the remote controller.
Guidance on operating the remote controller and mounting its holder.
Instructions for setting the current time on the remote controller.
How to select and operate the unit in AUTO, DRY, COOL, HEAT, and FAN modes.
Adjusting horizontal flaps and vertical louvers for optimal air distribution.
Activating POWERFUL mode for maximum cooling or heating efficiency.
Reducing the outdoor unit's noise level for quieter operation.
Recording and recalling preferred temperature and air flow settings.
Using the sensor for automatic energy-saving based on human presence.
Setting ON and OFF timers for automatic start and stop of the unit.
Instructions for cleaning the indoor, outdoor units, and remote controller.
Steps for opening, cleaning, and reattaching the indoor unit's front panel.
Procedures for cleaning air filters and replacing the air-purifying filter.
Explains normal operational behaviors that may seem like malfunctions.
Essential checks to perform before contacting a service technician.
Using the remote controller to identify system faults and interpret error codes.
General| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 6.0 kW |
| Heating Capacity | 7.0 kW |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
To Next Page
