Daikin FTXA20A - Page 121

2 | Components
Service manual
121
FTXA20~50A(W)(S)(T) + FTXA20~50B(B)(S)(T) + RXA42+50A +
RXA20~35A(9) + RXA42+50B
Split Stylish R32
ESIE18-03D – 2021.05
DANGER: RISK OF ELECTROCUTION
Wait for at least 10 minutes after the circuit breaker has been turned OFF, to be sure
the rectifier voltage is below 10VDC before proceeding.
2 Loosen and remove the screws that fix the top plate.
a b a aa aa
a Screw
b Top plate
3 Remove the top plate.
To remove the front plate
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
Prerequisite: Remove the top plate, see "2.14Plate work"[4120].
1 Loosen and remove the screws that fix the front plate.
a
a a
a
a
a
a Screw
b Front plate
2 Remove the front plate.
To remove the compressor sound insulation
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
Prerequisite: Remove the front plate, see "2.14Plate work"[4120].
1 Untwist the cord and remove the compressor sound insulation.