Daikin FTXB50C - OFF Timer Setting; Quiet Function; Clock Time Setting; ON Timer Setting

2
+2 C
+1 C
- 1 C
- 2 C
0 0.5 1 1.5 2
- 3 C
OFF timer setting
Press the OFF TIMER button will activate the off timer function.
Set the desired off time by pressing the OFF TIMER button continuously.
Press the CANCEL button to cancel the off timer setting.
Quiet function (model dependent)
Press for quiet operation.
Fan speed turn to minimum speed.
Press again to deactivate the function.
Available under HEAT and COOL modes only.
Any change of fan speed will deactivate this function.
Clock time setting
Press and hold
button to set the clock time.
ON timer setting
Press the ON TIMER button will activate the on timer function.
Set the desired on time by pressing the ON TIMER button continuously. If the
timer is set to 7.30am, the air conditioner will turn on at 7.30am sharp.
Press the CANCEL button to cancel the on timer setting.
Sleep mode setting
Press the
button will activate the sleep mode function.
This is an energy saving option. When the unit is operating under cooling mode,
the set temperature is increased by 0.5°C after
the first half an hour, another 0.5°C after the
second half an hour and 1°C after the following
1 hour.
When the unit is operating under heating
mode, the set temperature is decreased by
1°C after the first half an hour, another 1°C
after the second half an hour and 1°C after the
following 1 hour.
This function is available under COOL,
HEAT and AUTO mode.
Temperature setting
To set the desired room temperature, press the or button to increase or
decrease the set temperature.
The temperature setting range is from 16°C to 30°C (Optional setting 20°C to
30°C).
Press both buttons and simultaneously to toggle from °C to °F setting.
8.
•
•
•
9.
•
•
•
•
•
10.
•
11.
•
•
•
12.
•
•
•
•
13.
•
•
•
1-OM-GS02-1011(4)DAIKIN-EN.indd Sec1:21-OM-GS02-1011(4)DAIKIN-EN.indd Sec1:2 4/28/14 3:25:08 PM4/28/14 3:25:08 PM