What to do if the safety breaker cuts off the operation of Daikin FTXB25C2V1B frequently?
If the safety breaker, a fuse, or the earth leakage breaker cuts off the operation of your Daikin Air Conditioner frequently, it's recommended to immediately call the service shop.
Why Daikin FTXB25C2V1B does not operate and OPERATION lamp is off?
If your Daikin Air Conditioner isn't operating and the OPERATION lamp is off, check these items: * Confirm that a breaker hasn’t turned off or a fuse blown. * Ensure there isn’t a power failure. * Verify that batteries are correctly installed in the remote controller. * Check if the timer setting is correct.
What to do if water leaks from Daikin FTXB25C2V1B Air Conditioner indoor unit?
If you notice water leaking from the indoor unit of your Daikin Air Conditioner, it's recommended to immediately call the service shop.
Why is my Daikin FTXB25C2V1B cooling (heating) effect poor?
If your Daikin Air Conditioner is not cooling (or heating) effectively, consider the following: * Ensure that the air filters are clean. * Check for any obstructions blocking the air inlet or outlet of both the indoor and outdoor units. * Verify that the temperature setting is appropriate for your needs. * Make sure all windows and doors are closed properly. * Confirm that the airflow rate and direction are set correctly.
Why is there a burning smell coming from my Daikin FTXB25C2V1B?
If you notice a burning smell coming from your Daikin Air Conditioner, it's recommended to immediately call the service shop.
Why Daikin FTXB25C2V1B Air Conditioner remote controller does not work properly?
If your Daikin Air Conditioner remote controller isn't working correctly, replace all the batteries with new, size AAA.LR03 (alkaline) batteries.
Why does mist come out of the indoor unit of Daikin Air Conditioner?
If mist comes out of the indoor unit of your Daikin Air Conditioner, this happens when the air in the room is cooled into mist by the cold airflow during COOL operation. Also, this is because the air in the room is cooled by the heat exchanger and becomes mist during defrosting operation.
What to do if abnormal functioning happens during Daikin FTXB25C2V1B Air Conditioner operation?
If you're experiencing an abnormal functioning during the operation of your Daikin Air Conditioner, turn the breaker off, then turn it back on, and try operating the air conditioner with the remote controller.
What to do if a switch or a button often fails to work properly on Daikin FTXB25C2V1B?
If a switch or button on your Daikin Air Conditioner often fails to work properly, it's recommended to immediately call the service shop.
What to do if I hear abnormal sound during Daikin FTXB25C2V1B operation?
If you hear an abnormal sound during the operation of your Daikin Air Conditioner, it's recommended to immediately call the service shop.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Energy Efficiency Rating (Cooling) | A++ |
| Energy Efficiency Rating (Heating) | A+ |
| Outdoor Noise Level | 46 dB(A) |
| Indoor Noise Level | 20 dB(A) |
| Power Supply | 230V/50Hz |
Critical safety instructions, warnings, and cautions for operation.
Guidelines for installation site, electrical work, and system relocation.
Identification of indoor unit, outdoor unit, and remote controller parts.
Steps for setting up the unit, including battery installation.
How to start, stop, and adjust settings for AUTO, DRY, COOL, HEAT, and FAN modes.
Instructions for controlling flap and louvers for optimal airflow.
Activating comfort airflow for directed air distribution.
Maximizing cooling or heating effect quickly.
Enabling efficient operation by limiting maximum power consumption.
Setting the unit to automatically switch off at a desired time.
Setting the unit to automatically switch on at a desired time.
Procedures for cleaning the indoor unit and remote controller.
Instructions for removing, cleaning, and replacing air filters.
Guidelines for checking unit condition and performing periodic maintenance.
Solutions for common problems like flap movement, operation start, and unusual sounds.
How to read and interpret error codes displayed by the remote controller.
To Next Page
