What to do if Daikin FTXD50BVMA Air Conditioner has an abnormal functioning during operation?
If your Daikin Air Conditioner malfunctions during operation, it may be due to lightning or radio waves. Turn the breaker OFF, then turn it ON again, and try operating the air conditioner with the remote controller.
What to do if my Daikin Air conditioning does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check the following: Has a breaker turned OFF or a fuse blown? Is there a power failure? Are batteries properly set in the remote controller? Is the timer setting correct?
How to improve cooling (heating) effect of Daikin FTXD50BVMA?
If your Daikin Air Conditioner's cooling or heating effect is poor, check the air filters to ensure they are clean. Also, check for any obstructions blocking the air inlet or outlet. Make sure the temperature setting is appropriate, windows and doors are closed, the air flow rate and direction are set correctly, and the unit is not set to INTELLIGENT EYE mode.
How to stop the bad odor from my Daikin Air conditioning indoor unit?
If the indoor unit gives out an odor, it is recommended to have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
What to do if an abnormality (such as a burning smell) occurs with Daikin Air conditioning?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
What to do if there is a burning smell coming from Daikin Air conditioning?
If you notice a burning smell, immediately turn the breaker OFF and call the service shop.
What to do if I hear an abnormal sound during Daikin Air conditioning operation?
If you hear an abnormal sound during operation, turn the breaker OFF and call the service shop.
Why Daikin FTXD50BVMA Air Conditioner does not operate and OPERATION lamp is off?
If your Daikin Air Conditioner is not working and the OPERATION lamp is off, check the following: a breaker turned OFF, a fuse blown, a power failure, if batteries are set in the remote controller, or if the timer setting is correct.
Why is my Daikin FTXD50BVMA outdoor unit leaking water?
In HEAT mode, frost on the outdoor unit melts into water or steam when the Daikin air conditioner is in defrost operation. In COOL or DRY mode, moisture in the air condenses into water on the cool surface of outdoor unit piping and drips.
Why my Daikin Air conditioning operation does not start soon?
You should wait for about 3 minutes.
General| Brand | Daikin |
|---|---|
| Model | FTXD50BVMA |
| Category | Air Conditioner |
| Language | English |
Guidelines for selecting an appropriate location for unit installation.
Specifications for power supply and wiring connections.
Information on moving the air conditioner to a new location.
Identifies parts of the indoor air conditioner unit.
Details the controls on the main indoor unit panel.
Identifies parts of the outdoor air conditioner unit.
Describes the signal transmitter and the remote display functions.
Covers ON/OFF, MODE, FAN, TEMP, and HOME LEAVE buttons.
Explains POWERFUL, SILENT, SENSOR, TIMER, and CLOCK buttons.
Explains SWING buttons for flap and louvers.
Guide on how to insert AAA batteries into the remote controller.
Instructions on aiming the remote and communication range.
Procedure to set the current time on the remote controller.
Steps to select mode and start the air conditioner.
How to turn off the air conditioner.
Adjusting the temperature for different modes.
How to select different fan speeds in various modes.
Steps to control the horizontal flap swing.
Steps to control the vertical louvers swing.
How to activate and deactivate 3-D airflow.
How to activate the powerful cooling/heating mode.
Steps to deactivate the powerful operation.
How to reduce outdoor unit noise.
Steps to stop the outdoor unit silent mode.
How to activate the preferred setting recall function.
Steps to deactivate the home leave operation.
Explanation of the function and its benefits.
How to activate the human movement sensor feature.
Steps to deactivate the intelligent eye operation.
How the feature contributes to energy saving.
Procedure to set the unit to turn off automatically.
How to disable the off timer function.
Procedure to set the unit to turn on automatically.
Guidelines for mode selection and NIGHT QUIET Mode in multi systems.
How silent operation and mode lock work with multi systems.
How priority room affects operation mode selection.
How powerful operation is prioritized in a multi system.
How silent operation is prioritized in a multi system.
Steps for opening, removing, cleaning, and reattaching the front grille.
Instructions for cleaning standard air filters.
Maintenance and replacement of the air purifying filter.
To Next Page
