What to do if my Daikin FTXD71FVM operation stops suddenly and the OPERATION lamp flashes?
If the Daikin Air Conditioner operation stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstructions. Then, turn the breaker OFF, and turn it ON again. Try operating the air conditioner with the remote controller.
Why did my Daikin Air Conditioner operation stop suddenly and the OPERATION lamp is on?
If the Daikin Air Conditioner operation stopped suddenly and the OPERATION lamp is on, it may be due to a sudden large voltage fluctuation, which activates the system protection. The unit will automatically resume operation in about 3 minutes.
How to eliminate the odor from my Daikin Air Conditioner indoor unit?
We recommend having the indoor unit of your Daikin Air Conditioner washed by a technician to eliminate the odor.
What to do if the heating operation stops suddenly and a flowing sound is heard in Daikin FTXD71FVM Air Conditioner?
If the heating operation of your Daikin Air Conditioner stops suddenly and you hear a flowing sound, please wait for about 4 to 12 minutes.
General| Brand | Daikin |
|---|---|
| Model | FTXD71FVM |
| Category | Air Conditioner |
| Language | English |
Crucial warnings and cautions for safe operation and handling of the unit.
Detailed safety instructions covering electrical, operational, and environmental hazards.
Safety measures for outdoor unit placement and installation environment.
How to initiate and cease operation for various modes.
Guide to changing the desired temperature for cooling and heating.
How to adjust the fan speed for different operation modes.
How to start the mode for maximum cooling/heating effect.
How to stop the powerful operation mode.
How to reduce noise from the outdoor unit.
How to stop the outdoor unit quiet operation.
How to start the feature to recall preferred settings.
How to stop the Home Leave operation.
How to enable the infrared sensor for human movement detection.
Procedure to schedule the unit to turn off automatically.
Procedure to schedule the unit to turn on automatically.
How to select modes when multiple indoor units are connected.
Priority room's mode takes precedence in multi-system.
Checks for when the air conditioner fails to start.
Checks for reduced cooling or heating effectiveness.
Critical safety advice for hazardous conditions or repairs.
Indicators that necessitate contacting a service technician.
To Next Page
