What to do if my Daikin FTXF25B5V1B does not operate at all?
If your Daikin Air Conditioner isn't operating, first check for a power failure and wait for the power to be restored. If there was a power failure during operation, the system will restart automatically. Also, check if a fuse has blown or a breaker is activated, and replace the fuse or reset the breaker if needed. Finally, check the batteries in the user interface.
Why is my Daikin Air Conditioner operating but the cooling or heating is insufficient?
If your Daikin Air Conditioner is running but the cooling or heating isn't sufficient, check the airflow rate setting, temperature setting, and airflow direction setting. Also, make sure that the air inlet or outlet of the outdoor or indoor unit is not blocked by any obstacles. Remove any obstructions to ensure free airflow.
Why does my Daikin FTXF25B5V1B suddenly stop operating?
If your Daikin Air Conditioner suddenly stops, check if the air inlet or outlet of the outdoor or indoor unit is blocked by obstacles and remove them to ensure free airflow. Also, the air conditioner may stop operating after sudden large voltage fluctuations to protect the system and will automatically resume operation after about 3 minutes.
What to do if my Daikin Air Conditioner blows air, but cooling or heating is insufficient?
If your Daikin Air Conditioner is blowing air, but the cooling or heating is insufficient, check if the air filters are clogged and clean them. Ensure doors and windows are closed to prevent wind from entering. Check if the unit is operating in Econo mode. Also, check for any furniture directly under or next to the indoor unit and move it.
Why doesn't my Daikin FTXF25B5V1B Air Conditioner receive signals from the user interface?
If your Daikin Air Conditioner isn't receiving signals from the user interface, check the batteries. Ensure the transmitter isn't exposed to direct sunlight. Also, check for electronic starter-type fluorescent lamps in the room.
What to do if my Daikin FTXF25B5V1B operates, but cooling or heating is insufficient and no air is blown from the unit?
If your Daikin Air Conditioner operates, but cooling or heating is insufficient and no air is blown, the air conditioner may be warming up for heating operation; wait 1 to 4 minutes. Alternatively, the unit may be in defrost operation.
What to do if the safety device of my Daikin FTXF25B5V1B Air Conditioner frequently actuates?
If a safety device such as a fuse, a breaker, or an earth leakage breaker frequently activates, or if the ON/OFF switch of your Daikin Air Conditioner doesn't work properly, turn OFF the main power switch.
How to fix a blank user interface display on my Daikin Air Conditioner?
If the user interface display of your Daikin Air Conditioner is blank, replace the batteries of the user interface.
What to do if an abnormal function happens during operation of my Daikin FTXF25B5V1B Air Conditioner?
If an abnormal function occurs during the operation of your Daikin Air Conditioner, it may be due to lightning or radio waves. Turn the breaker OFF and then back ON.
Why do other electric appliances start to operate when I use my Daikin FTXF25B5V1B Air Conditioner?
If the user interface signals from your Daikin Air Conditioner are causing other electric appliances to operate, move the other appliances away and contact your dealer.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Power Supply | 230V/50Hz |
| Weight (Outdoor Unit) | 26 kg |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Refrigerant | R-32 |
| Outdoor Unit Weight | 26 kg |
| Type | Split |
| Noise Level (Indoor) | 19 dBA |
Instructions for mounting the user interface securely on a wall or suitable surface.
Specifies the environmental conditions (temperature, humidity) for optimal system operation.
Details on how to select operation modes and set the desired room temperature.
Maximizes cooling or heating effect quickly for rapid temperature adjustment.
Information on recommended yearly maintenance by authorized personnel.
Lists common malfunctions and their corrective measures.
Explains how to display and interpret error codes shown on the user interface.
To Next Page
