Ŷ
To change the temperature setting
Press .
• The displayed items on the LCD will change whenever either one of the buttons is
pressed.
COOL operation HEAT operation AUTO operation DRY or FAN ONLY operation
18.0-32.0°C 10.0-30.0°C 18.0-30.0°C
The temperature setting is
not available.
Press
to raise the temperature and press to lower the
temperature 1.0°C each press.
Ŷ
Operating conditions
Ŷ
Recommended temperature setting
• For cooling: 26.0-28.0°C
• For heating: 20.0-24.0°C
Ŷ
Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) ef
Clogged air filters cause inefficient operation and waste energy. Clean them once in about every 2 weeks.
fect.
•
Ŷ
Notes on the operating conditions
• The air conditioner always consumes a small amount of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker off.
• Use the air conditioner in the following conditions.
MODE Operating conditions If operation is continued out of this range
COOL
:erutarepmet roodtuO -10.0 ~ 46.0°C
Indoor temperature : 18.0-32.0°C
Indoor humidity : 80% max.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
HEAT
:erutarepmet roodtuO -15.0 ~ 24.0°C
Indoor temperature : 10.0-30.0°C
• A safety device may work to stop the operation.
DRY
:erutarepmet roodtuO -10.0 ~ 46.0°C
Indoor temperature : 18.0-32.0°C
Indoor humidity : 80% max.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
P
P
10
To Next Page
Loading...
