To Next Page
T
Tracey GrimesAug 22, 2025
What to do if my Daikin Air Conditioner smells like burning?
- GGregory BassAug 22, 2025
If your Daikin Air Conditioner is emitting a burning smell, turn the breaker OFF and call the service shop immediately.
What to do if my Daikin Air Conditioner smells like burning?
If your Daikin Air Conditioner is emitting a burning smell, turn the breaker OFF and call the service shop immediately.
Why isn't my Daikin Air Conditioner blowing hot air right away?
If hot air does not flow out soon after the start of heating operation of your Daikin Air Conditioner, you should wait for 1 to 4 minutes.
Why is my Daikin FTXG35CVMAW not cooling or heating properly?
If the cooling or heating effect of your Daikin Air Conditioner is poor, check if the air filters are clean, if there is anything blocking the air inlet or outlet, if the temperature setting is appropriate, if the windows and doors are closed, if the air flow rate and direction are set appropriately, and if the unit is set to the INTELLIGENT EYE mode.
Why is my Daikin FTXG35CVMAW Air Conditioner malfunctioning?
If an abnormal functioning happens during operation of your Daikin Air Conditioner, it may be due to lightning or radio waves. Turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
What to do if a button on my Daikin Air Conditioner remote is not working?
If a switch or a button on your Daikin Air Conditioner often fails to work properly, turn the breaker OFF and call the service shop.
What to do if my Daikin FTXG35CVMAW stops suddenly and the operation lamp flashes?
If your Daikin Air Conditioner suddenly stops and the OPERATION lamp is flashing, try these steps: Begin by cleaning the air filters to remove any accumulated dust or debris. Make sure there are no obstructions blocking the unit. After addressing these issues, turn the breaker OFF, wait a moment, and then turn it back ON. Finally, attempt to operate the air conditioner again using the remote controller.
Why is the cooling/heating effect poor on my Daikin FTXG35CVMAW?
If your Daikin Air Conditioner isn't cooling or heating well, several factors could be the cause. Begin by checking if the air filters are clean. Ensure that nothing is blocking the air inlet or outlet of either the indoor or outdoor units. Verify that the temperature setting is appropriate for your needs, and that all windows and doors are properly closed. Confirm that the airflow rate and direction are correctly set. Lastly, check if the unit is set to INTELLIGENT EYE mode, as this mode might be affecting the cooling or heating performance.
How to fix a Daikin FTXG35CVMAW Air Conditioner that won't turn on?
If your Daikin Air Conditioner is not operating and the OPERATION lamp is off, check if a breaker is turned OFF or a fuse is blown. Also, verify if there is a power failure, if batteries are set in the remote controller, or if the timer setting is correct.
What to do if my Daikin FTXG35CVMAW Air Conditioner indoor unit is leaking water?
If water leaks from the indoor unit of your Daikin Air Conditioner, turn the breaker OFF and call the service shop.
General| Brand | Daikin |
|---|---|
| Model | FTXG35CVMAW |
| Category | Air Conditioner |
| Language | English |
Covers warnings and cautions for operation, fire, injury, and handling.
Guidelines for selecting installation locations to avoid annoying neighbours with noise.
Identifies and describes parts of the indoor air conditioning unit.
Explains the buttons and display of the remote control unit.
Instructions for inserting and replacing batteries in the remote controller.
Provides advice on optimizing energy consumption for cooling and heating.
Important points regarding power consumption and long-term usage.
Details how to start, stop, and adjust the temperature for different operation modes.
Provides notes for HEAT, DRY, and AUTO operations, and airflow settings.
Instructions for adjusting the flap (horizontal) and louvers (vertical) for airflow.
Explains how to activate and deactivate the powerful cooling/heating mode.
Details how to enable and disable the silent operation for the outdoor unit.
Instructions for activating and deactivating the sensor-based operation mode.
Step-by-step guide to setting the timer to turn the unit off.
Detailed steps for safely removing and cleaning the front panel of the indoor unit.
Guidance on washing air filters and maintaining the photocatalytic air-purifying filter.
Covers general checks, filter cleaning, and preparing the unit for long periods of inactivity.
Addresses issues like delayed start, no hot air, and sudden heating stops.
Lists symptoms that require immediate professional service.
Information on proper unit disposal and the recommendation for periodic professional maintenance.
