Why did my Daikin FTXG35CVMAS Air Conditioner stop suddenly but the operation lamp is on?
If your Daikin Air Conditioner stops suddenly but the OPERATION lamp is on, it may be due to a sudden large voltage fluctuation for system protection. The unit will automatically resume operation in about 3 minutes.
What to do if my Daikin FTXG35CVMAS indoor unit is leaking water?
If water leaks from the indoor unit of your Daikin Air Conditioner, turn the breaker OFF and call the service shop.
How to fix a Daikin FTXG35CVMAS Air Conditioner that won't turn on?
If your Daikin Air Conditioner is not operating and the OPERATION lamp is off, check if a breaker is turned OFF or a fuse is blown. Also, verify if there is a power failure, if batteries are set in the remote controller, or if the timer setting is correct.
Why is the cooling/heating effect poor on my Daikin Air Conditioner?
If your Daikin Air Conditioner isn't cooling or heating well, several factors could be the cause. Begin by checking if the air filters are clean. Ensure that nothing is blocking the air inlet or outlet of either the indoor or outdoor units. Verify that the temperature setting is appropriate for your needs, and that all windows and doors are properly closed. Confirm that the airflow rate and direction are correctly set. Lastly, check if the unit is set to INTELLIGENT EYE mode, as this mode might be affecting the cooling or heating performance.
What to do if my Daikin Air Conditioner stops suddenly and the operation lamp flashes?
If your Daikin Air Conditioner suddenly stops and the OPERATION lamp is flashing, try these steps: Begin by cleaning the air filters to remove any accumulated dust or debris. Make sure there are no obstructions blocking the unit. After addressing these issues, turn the breaker OFF, wait a moment, and then turn it back ON. Finally, attempt to operate the air conditioner again using the remote controller.
What to do if a button on my Daikin FTXG35CVMAS Air Conditioner remote is not working?
If a switch or a button on your Daikin Air Conditioner often fails to work properly, turn the breaker OFF and call the service shop.
What to do if my Daikin FTXG35CVMAS Air Conditioner does not operate and the operation lamp is off?
If your Daikin Air Conditioner isn't turning on and the OPERATION lamp is off, check the following: First, see if a breaker has tripped or a fuse has blown. Next, verify that there isn't a power failure in your area. Ensure that the batteries in the remote controller are correctly installed and have power. Finally, double-check that the timer setting is correct and hasn't inadvertently turned the unit off.
What to do if Daikin Air Conditioner shows abnormal functioning during operation?
If your Daikin Air Conditioner is showing abnormal behavior during operation, turn the breaker OFF, wait a few seconds, and then turn it back ON. After doing this, try operating the air conditioner again using the remote controller to see if the issue has been resolved.
Why doesn't hot air flow out immediately from my Daikin FTXG35CVMAS Air Conditioner after starting heating?
If hot air doesn't flow out soon after starting the heating operation on your Daikin Air Conditioner, allow 1 to 4 minutes for the unit to begin heating.
How to get rid of bad smell from my Daikin Air Conditioner?
If the indoor unit of your Daikin Air Conditioner gives out an odor, it is recommended to have the indoor unit washed by a technician.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Weight (Indoor Unit) | 10 kg |
| Weight (Outdoor Unit) | 30 kg |
| Type | Split System |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
| COP | 4.00 |
| Energy Efficiency Ratio (Heating) | 4.00 |
| Refrigerant | R-32 |
| Indoor Noise Level | 20 dB(A) (Low) |
Covers fire, explosion, injury, electrical safety, and general handling of the unit.
Covers earthing, child safety, exposure to airflow, and gas detection.
Specifies suitable locations and placement for noise mitigation.
Covers dedicated circuits and professional relocation advice.
Identifies numbered components of the indoor unit.
Identifies numbered components of the outdoor unit.
Provides descriptions for numbered indoor unit components.
Explains the purpose of each button on the remote controller.
Step-by-step guide to insert batteries into the remote controller.
Important notes on battery care and replacement.
How to use the remote controller and mount its holder.
Instructions for adjusting the current time on the unit.
Recommendations for efficient operation and usage guidelines.
How to turn the air conditioner unit on and off.
How to set the desired temperature for cooling or heating.
How to change the fan speed for optimal comfort.
Important considerations for HEAT, DRY, and AUTO modes.
How to set the direction of airflow using flap and louvers.
Enabling and disabling simultaneous horizontal and vertical airflow movement.
How to use the comfort airflow feature to prevent direct air blowing.
Maximizes cooling or heating effect quickly for rapid comfort.
Lowers the outdoor unit noise level for quiet operation.
How to turn the sensor feature on and off for automatic adjustments.
How the sensor contributes to energy efficiency.
Notes on detection range, sensitivity, and careful handling of the sensor.
Instructions for setting and disabling the auto-off timer.
Automatic temperature adjustment for comfortable sleep.
Instructions for setting and disabling the auto-on timer.
How to use both timers concurrently for scheduled operation.
Situations requiring timer settings to be reset.
Essential safety steps before performing unit maintenance.
General instructions for cleaning indoor, outdoor units, and remote.
Procedures for opening, cleaning, and reattaching the top front panel.
Instructions for cleaning and replacing the unit's air filters.
Specific maintenance instructions for the air-purifying filter.
Verification steps to perform before operating the unit.
Steps for preparing the unit for long periods of non-use.
Explains common behaviors that may seem like faults but are normal.
Steps to resolve common problems like poor cooling or heating.
Troubleshooting panel issues and general malfunctions.
Immediate actions for serious issues and general warnings.
List of specific faults that need technician attention.
Importance of professional servicing for longevity and performance.
To Next Page
