Why is my Daikin Air Conditioner outdoor unit emitting water or steam?
The outdoor unit may emit water or steam for these reasons: * In HEAT operation: The frost on the outdoor unit melts into water or steam when the air conditioner is in defrost operation. * In COOL or DRY operation: Moisture in the air condenses into water on the cool surface of outdoor unit piping and drips.
What to do if my Daikin FTXM35M2V1B does not turn on?
If your Daikin air conditioner isn't turning on, check the following: * Has a breaker tripped or a fuse blown? * Is there a power failure in your area? * Are the batteries correctly installed in the remote controller? * Is the timer setting correct?
General| Brand | Daikin |
|---|---|
| Model | FTXM35M2V1B |
| Category | Air Conditioner |
| Language | English |
Detects human movement for energy saving operation.
Read manual, intended use, warning classification.
Risks of fire, explosion, injury from misuse, hazardous substances.
Avoiding damage, proper installation, environmental considerations.
Identifies transmitter, receiver, LCD display, and main buttons.
Step-by-step guide to set the current time and day on the remote controller.
Explains the characteristics and best uses of AUTO, DRY, COOL, HEAT, and FAN modes.
How to modify the temperature for different operation modes.
Advice on efficient usage, including temperature settings, window coverings, and filter cleaning.
How to activate and control auto swing for upper/lower and right/left airflow.
Using 3-D airflow and setting flaps/louvers to a specific position.
Directs airflow for enhanced comfort during cooling/heating.
Detects presence for automatic energy saving.
How to activate COMFORT AIRFLOW and INTELLIGENT EYE operations via the remote.
Steps to deactivate these features and return to normal operation.
How to start and stop the POWERFUL operation.
Limits power consumption for efficiency and breaker protection.
How to activate ECONO and OUTDOOR UNIT QUIET modes using the remote.
Steps to deactivate these modes.
Instructions for programming and disabling the unit's turn-off timer.
Procedures for programming and disabling the unit's turn-on timer.
Overview of setting up to 4 timers per day for weekly scheduling.
Demonstrates setting different schedules for weekdays and weekends.
How to initiate the weekly timer setup process on the remote.
Choosing the day of the week and the program number for setting.
How to specify the time and temperature for each weekly timer reservation.
Finalizing the timer settings and confirmation.
Checks for power, errors, or abnormal functioning.
Addresses issues when the operation lamp flashes or is on.
Checks filters, obstructions, settings for reduced efficiency.
Symptoms requiring immediate professional attention.
A list of error codes and their meanings.
To Next Page
