15
English
ECONO Operation
ECONO operation is a function which enables effi cient operation by
limiting the maximum power consumption value.
This function is useful for cases in which attention should be paid to
ensure a circuit breaker will not trip when the product runs alongside
other appliances.
To start ECONO operation
Press 1. .
“ • ” is displayed on the LCD.
To cancel ECONO operation
Press 2. again.
“ • ” disappears from the LCD.
Running current and
power consumption
Maximum during
normal operation
Time
Maximum during
ECONO operation
From start up until set
temperature is reached
Normal
operation
ECONO
operation
This diagram is a representation for illustrative purposes only.•
The maximum running current and power consumption of the air conditioner in ECONO *
operation vary with the connecting outdoor unit.
NOTE
Notes on ECONO operation
ECONO operation can only be set when the unit is running. •
ECONO operation is a function which enables effi cient operation by limiting the power •
consumption of the outdoor unit (operating frequency).
ECONO operation functions in AUTO, COOL, DRY and HEAT operation. •
POWERFUL and ECONO operation cannot be used at the same time. •
Priority is given to the function of whichever button is pressed last.
If the level of power consumption is already low, ECONO operation will not drop the power •
consumption.
01_EN_3P272441-5.indb 1501_EN_3P272441-5.indb 15 11/30/2010 4:01:47 PM11/30/2010 4:01:47 PM
To Next Page
Loading...
