HOME LEAVE operation is a function which allows you to record your preferred
temperature and airfl ow rate settings.
To start HOME LEAVE operation
Press 1. .
“ • ” is displayed on the LCD.
The HOME LEAVE lamp lights up.•
To cancel HOME LEAVE operation
Press 2. again.
“ • ” disappears from the LCD.
The HOME LEAVE lamp goes off.•
Before using HOME LEAVE operation.
To set the temperature and airfl ow rate for HOME LEAVE operation
When using HOME LEAVE operation for the fi rst time, please set the temperature and airfl ow rate for HOME LEAVE operation.
Record your preferred temperature and airfl ow rate.
Initial setting Selectable range
Temperature Airfl ow rate Temperature Airfl ow rate
COOL 77°F(25°C) AUTO 64-90°F(18-32°C) 5 step, “
” and “ ”
HEAT 77°F(25°C) AUTO 50-86°F(10-30°C) 5 step, “
” and “ ”
Press 1.
. Make sure “ ” is displayed in the remote controller display.
Adjust the set temperature with “ 2.
” or “ ” as you like.
Adjust the airfl ow rate with “FAN” setting button as you like.3.
Home leave operation will run with these settings the next time you use the unit. To change the recorded information, repeat
steps 1 – 3.
HOME LEAVE Operation
01_EN_3P232717-2C.indd 1801_EN_3P232717-2C.indd 18 12/22/2008 3:58:05 PM12/22/2008 3:58:05 PM
To Next Page
Loading...
