What to do if an abnormal functioning happens during Daikin Air Conditioner operation?
If you experience abnormal functioning during Daikin Air Conditioner operation, turn the breaker OFF, then turn it ON again. After that, try operating the air conditioner using the remote controller.
What to do if Daikin Air conditioning operation stops suddenly and the OPERATION lamp flashes?
If the Daikin air conditioning stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
What to do if water leaks from the indoor unit of Daikin Air conditioning?
If water leaks from the indoor unit, turn the breaker OFF and call the service shop.
Why my Daikin Air conditioning operation does not start soon?
You should wait for about 3 minutes.
Why does mist come out of the Daikin FTXS25CVMB Air Conditioner indoor unit?
This occurs when the air in the room is cooled into mist by the cold airflow during cooling operation of the Daikin Air Conditioner.
Why does mist come out of my Daikin FTXS25CVMB Air Conditioner?
This happens when the air in the room is cooled into mist by the cold air flow during cooling operation.
Why doesn't hot air come out immediately from my Daikin FTXS25CVMB Air Conditioner when heating?
You should wait for 1 to 4 minutes. The system is designed to start discharging air only after it has reached a certain temperature.
Why is my Daikin Air conditioning cooling/heating effect poor?
The cooling or heating effect might be poor due to several reasons. Check if the air filters are clean. Ensure there is nothing blocking the air inlet or outlet of the indoor and outdoor units. Verify that the temperature setting is appropriate. Make sure the windows and doors are closed. Confirm that the airflow rate and direction are set correctly. Also, check if the unit is set to INTELLIGENT EYE mode.
Why is the cooling or heating effect poor in my Daikin Air Conditioner?
If the cooling or heating effect of your Daikin Air Conditioner is poor, check whether the air filters are clean.
What to do if an abnormality (such as a burning smell) occurs with Daikin Air conditioning?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
Covers general warnings, cautions, and specific safety instructions for safe operation.
Guidelines for choosing a suitable installation location to ensure proper function and safety.
Requirements for electrical connections and procedures for safely relocating the air conditioner unit.
Identification and description of the various parts of the indoor air conditioning unit.
Identification and description of the various parts of the outdoor air conditioning unit.
Identification and description of the buttons and display of the remote controller.
Step-by-step instructions for correctly inserting batteries into the remote controller.
Guidelines for operating the remote controller and fixing its holder on a wall.
Procedure for setting the internal clock for accurate timer functions.
Steps to start/stop the unit and adjust the temperature settings for comfort.
Explanations for HEAT, COOL, DRY, and AUTO operation modes and their characteristics.
How to change the fan speed settings for different operation modes.
Instructions for controlling the direction of airflow using horizontal blades (flaps).
Instructions for manually adjusting the direction of airflow using vertical louvers.
How to activate the powerful mode for quick cooling or heating effect.
How to reduce the noise level of the outdoor unit for quiet operation.
How to record and use personalized temperature and airflow settings.
Using the motion sensor for energy saving and adjusting its detection angle.
Setting ON and OFF timers for automatic unit control.
Guidelines for operating multiple indoor units connected to one outdoor unit.
How the priority room designation affects operation and feature control.
Instructions for cleaning the indoor and outdoor unit components.
Steps for cleaning and replacing air filters and photocatalytic deodorizing filters.
Essential checks before operation and steps for preparing the unit for long-term storage.
Explains common behaviors that are not actual malfunctions.
Steps to diagnose issues and interpret fault codes.
Situations requiring professional service and critical safety warnings.
How to interpret LED lights on the outdoor unit PCB for fault diagnosis.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Energy Efficiency Ratio (EER) Cooling | 3.21 |
| Weight (Indoor Unit) | 8 kg |
| Type | Split System |
| Coefficient of Performance (Heating) | 4.0 |
| Refrigerant | R32 |
| Noise Level (Indoor Unit) | 19 dB (Low) |
| Noise Level (Outdoor Unit) | 48 dB(A) |
| Power Supply | 220-240V / 50Hz |
To Next Page
