To Next PageTo Next Page
Need help?Do you have a question about the Daikin FTXS25G2V1B and is the answer not in the manual?
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Coefficient of Performance (COP) | 4.0 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 9 kg |
| Type | Split |
Main installation manual for R410A Split Series air conditioners.
Installationsanleitung for R410A Split Series.
Manuel d'installation for R410A Split Series.
Montagehandleiding for R410A Split Series.
Manual de instalación for R410A Split Series.
Manuale d'installazione for R410A Multiambienti Series.
Εγχειρίδιο εγκατάστασης for R410A Split Series.
Manual de Instalação for R410A Split Series.
Руководство по монтажу for R410A Split Series.
Montaj kılavuzları for R410A Split Series.
Declarations of conformity for Daikin air conditioner models with EU directives.
Compliance with Low Voltage and Electromagnetic Compatibility directives.
Notes regarding compliance certificates and approvals (A, B, C).
Explanation of WARNING and CAUTION classifications for safety instructions.
Explanation of symbols used for safety instructions.
Instructions for trial operation and customer explanation after installation.
Essential safety warnings regarding installation procedures and electrical work.
Important precautions for installing the unit, especially concerning refrigerant gas.
List of accessories provided with the indoor unit and remote controller.
Criteria for selecting an appropriate location for the indoor unit.
Guidelines for positioning the wireless remote controller for optimal reception.
Instructions on setting dipswitches for cooling-only or heat pump models.
Procedure for removing and attaching the front panel of the indoor unit.
Procedure for removing and attaching the front grille of the indoor unit.
Guidance for installing the unit when space near the ceiling is limited.
How to set unique addresses for multiple indoor units in one room.
Procedure for connecting the unit to an HA system.
Methods for removing different types of metal plate electrical wiring covers (Type A/B).
Procedure for attaching different types of metal plate electrical wiring covers (Type A/B).
Diagrams showing how to mount the indoor unit onto the wall plate.
Diagrams illustrating the process of detaching the indoor unit.
Diagrams for installing Titanium Apatite Photocatalytic Air-Purifying Filters.
Diagrams for opening the service lid and installing the remote controller holder.
Important cautions regarding the handling and placement of the intelligent-eye sensor.
Steps and dimensions for securely installing the indoor unit's mounting plate.
Detailed dimensions and retention spots for the mounting plate.
Procedure for creating a wall hole and installing embedded piping for unit connection.
Steps for installing the indoor unit with right-side, right-back, or right-bottom piping.
Steps for installing the indoor unit with left-side, left-back, or left-bottom piping.
Instructions for connecting and routing the drain hose.
Details on wall embedded piping for left-side installations.
Guide to wiring indoor and outdoor units, including safety warnings.
Instructions for connecting and extending the drain hose, including insulation.
Procedure for correctly flaring pipe ends for refrigerant connections.
Critical warnings regarding the handling of refrigerant piping and materials.
Instructions for connecting refrigerant pipes, including oil application and torque.
Precautions for handling pipes to prevent damage, dust, or moisture.
Guidelines for selecting and applying thermal insulation for refrigerant pipes.
Steps to follow for pump down operation before relocating or disposing of the unit.
How to activate forced cooling operation mode.
Steps for performing trial operation in cooling or heating modes.
Instructions for initiating and controlling trial operation using the remote controller.
List of items to check during trial operation and their expected symptoms.
