Daikin FTXS25LVMA - POWERFUL Operation; To start POWERFUL operation; To cancel POWERFUL operation

Si041137 Removal of PCBs (Pattern 1)
Removal Procedure 15
2. Remove the terminal
board.
1
Remove the screw and
remove the terminal
board.
3. Remove the signal
receiver unit.
1
Unfasten the 3 hooks.
2
Unfasten the hook on
the opposite side, and
lift up the signal
receiver unit.
Step
Procedure Points
(R10315)
Terminal board
(R12277)
Signal receiver unit
(R8262)