Need help?Do you have a question about the Daikin FTXS36LVJU and is the answer not in the manual?
General| Cooling Capacity | 3.6 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 290 x 800 x 206 mm |
| Outdoor Unit Dimensions (W x H x D) | 800 x 550 x 285 mm |
| Outdoor Unit Noise Level | 48 dB(A) |
| Type | Split |
| EER | 3.61 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Energy Efficiency Ratio (Cooling) | 3.61 |
| Power Supply | 220-240V/50Hz |
Details of functions available for the FTXS Series and FDXS Series indoor and outdoor units.
Technical specifications for FTXS Series and FDXS Series units, covering various models.
Wiring diagrams and connector details for FTXS and FDXS indoor units.
Wiring diagrams and connector details for RXS and RKS outdoor units.
Overview of core operational functions like temperature, frequency, and airflow control.
Explanation of the role and function of thermistors in system operation.
Detailed specifications on control logic, modes, and protection mechanisms.
General information on system setup and user guidance after installation.
Detailed instructions on operating the FTXS Series unit using the remote controller.
Detailed instructions on operating the FDXS Series unit using the remote controller.
Troubleshooting guide based on LED indicators for indoor and outdoor units.
Common operating problems and their corresponding solutions and measures.
Procedures for accessing and using the unit's service check functions.
Comprehensive list and description of error codes for troubleshooting.
Detailed checks for specific components like thermistors, motors, and PCBs.
Step-by-step instructions for removing components of the FTXS09/12LVJU indoor unit.
Step-by-step instructions for removing components of the FTXS15/18/24LVJU indoor unit.
Step-by-step instructions for removing components of the FTXS30/36LVJU indoor unit.
Step-by-step instructions for removing components of the RXS09/12LVJU outdoor unit.
Step-by-step instructions for removing components of the RXS15/18LVJU outdoor unit.
Procedure for pump down operation when relocating or disposing of the unit.
How to perform forced cooling operation for testing purposes.
Steps for conducting trial operation to ensure proper function after installation.
Adjustments and settings required after installation.
Procedure for applying silicon grease to power transistor and diode bridge for heat radiation.
Diagrams illustrating the refrigerant piping for indoor and outdoor units.
Diagrams illustrating the electrical wiring for indoor and outdoor units.
To Next Page
