Outdoor Unit: RXS15/18LVJU SiUS091133
309 Removal Procedure
3
Pull out the clamp. The compressor harness has a
clamp.
When reassembling, insert the
clamp as below.
4
Disconnect the
connectors [HN3] and
[HL3].
[HL3]: for [HL2] on filter PCB
[HN3]: for [HN2] on filter PCB
5
Pull out the clamp. When reassembling, insert the
clamp as below.
Step
Procedure Points
(R16747)
Compressor harness
(red, blue, yellow)
[HN3]: white
[HL3]: blue
(R16809)
(R16960)
Harnesses from [HL2]
(blue) and [HN2] (white)
To Next Page
Loading...
