What to do if other electric appliances start to operate when using my Daikin FTXTP35M5V1B Air Conditioner?
If the user interface signals operate other electric appliances, move the other appliances away.
Why is my Daikin FTXTP35M5V1B not cooling or heating enough?
Several factors could be causing insufficient cooling or heating. Check the airflow rate setting, the temperature setting, and ensure the airflow direction is appropriate. Also, make sure the air inlet or outlet of the outdoor or indoor unit is not blocked by obstacles. Remove any obstructions to allow free airflow.
Why does my Daikin FTXTP35M5V1B Air Conditioner suddenly stop working?
The sudden stop may occur if the air inlet or outlet of the outdoor or indoor unit is blocked; remove any obstacles to ensure free airflow. Alternatively, the air conditioner might stop operating due to sudden large voltage fluctuations, in which case it will automatically resume operation after about 3 minutes.
Why is my Daikin FTXTP35M5V1B blowing air but not cooling or heating properly?
There are several possible reasons: * The air filters may be clogged, so clean them. * Check for open doors or windows and close them to prevent drafts. * Ensure the unit isn't in Econo operation. * Check if furniture is blocking the indoor unit; if so, move it.
What to do if my Daikin FTXTP35M5V1B Air Conditioner doesn't operate at all?
First, check if there is a power failure and wait until the power is restored. If the power outage occurred during operation, the system should automatically restart immediately after power is restored. Also, verify that no fuse has blown or breaker is activated; replace the fuse or reset the breaker if needed. Finally, check the batteries of the user interface.
What to do if none of the LEDs light on my Daikin Air Conditioner?
Try operating the unit with the user interface. Turn the unit off and then back on. Make sure the LEDs are not disabled in the application and check if the adapter is installed correctly.
What to do if my Daikin FTXTP35M5V1B Air Conditioner unit does NOT receive signals from the user interface?
First, check the batteries of the user interface. Also, make sure that the transmitter is not exposed to direct sunlight. Finally, check if there are any electronic starter type fluorescent lamps in the room.
What to do if my Daikin Air Conditioner user interface display is blank?
Replace the batteries of the user interface.
What to do if my Daikin FTXTP35M5V1B operates, but cooling or heating is insufficient and air is NOT blown from the unit?
The air conditioner may be warming up for heating operation; wait 1 to 4 minutes. Alternatively, the unit may be in defrost operation.
Why is my Daikin FTXTP35M5V1B remote display blank?
Replace the batteries of the wireless remote control.
Covers general safety advice and precautions for users regarding appliance operation and maintenance.
Provides specific safety guidelines to prevent hazards such as electrocution, fire, and physical injury during operation.
Explains the wireless remote control, its buttons, LCD display icons, and basic operation.
Details how to select operation modes (Auto, Dry, Heat, Cool, Fan) and set the temperature.
Lists common malfunctions and initial troubleshooting steps to resolve issues.
Explains how to check and interpret error codes for fault diagnosis.
General| Model | FTXTP35M5V1B |
|---|---|
| Category | Air Conditioner |
| Type | Wall Mounted |
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Indoor Unit Dimensions (W x H x D) | 770 x 286 x 225 mm |
| Outdoor Unit Dimensions (W x H x D) | 845 x 595 x 300 mm |
| Weight (Indoor Unit) | 9.5 kg |
| Star Rating | 5 Star |
| Refrigerant | R32 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
| Power Supply | 230V/50Hz |
To Next Page
