7
Read Before Operation Read Before Operation
Remote Controller
Model name ARC466A88
Display (LCD)
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
TEMPERATURE
adjustment button
• Changes the temperature setting.
Page 15
ON/OFF button
•
Press this button once to start operation.
Press once again to stop it.
Page 14
Front cover
• Open the front cover.
Page 8
Signal transmitter
7 m
Receiver
• To use the remote controller, aim the
transmitter at the indoor unit. If there
is anything blocking the signals
between the unit and the remote
controller, such as a curtain, the unit
may not operate.
• The maximum transmission distance
is about 7 m.
POWERFUL button /
HEAT PLUS button /
Wireless LAN button
POWERFUL button
• POWERFUL operation.
Page 25
HEAT PLUS button
• HEAT PLUS operation.
Page 25
Wireless LAN button (push 5 seconds)
• Wireless LAN connection.
Page 37
FAN setting button
• Selects the airow rate setting.
Page 17
Names of Parts
01_EN_3P705032-11D.indd 701_EN_3P705032-11D.indd 7 06-Feb-24 2:19:23 PM06-Feb-24 2:19:23 PM