Need help?Do you have a question about the Daikin FVXS35FV1B and is the answer not in the manual?
Procedure to remove the shield plate, including pulling out the clamp for earth/ground wires.
Procedure to unfasten hooks and disconnect connector to remove the sensor PCB.
Procedure to cut clamp, open lamp cover, and unfasten hooks to remove the service PCB.
Procedure to unfasten hooks and disconnect connector to remove the display PCB.
Procedure to disconnect terminals, remove screws, and unfasten hook to remove the control PCB.
Procedure to remove the upper vertical blade ASSYS, including air outlet ASSY and protection net.
Procedure to remove the lower vertical blade ASSYS, drain pan ASSY, motor cover, and damper.
Procedure to remove the bellmouth and fan rotor by unscrewing and removing the nut.
Procedure to release harness and remove fan motor by unscrewing fan motor cover and retainer.
Procedure to remove upper casing and other casings by unfastening hooks and removing screws.
To Next Page
General