To Next PageTo Next Page
Need help?Do you have a question about the Daikin FWT02GATNMV1 and is the answer not in the manual?
General| Model | FWT02GATNMV1 |
|---|---|
| Cooling Capacity | 2.0 kW |
| Heating Capacity | 2.5 kW |
| Refrigerant | R32 |
| Indoor Unit Dimensions (WxHxD) | 770 x 285 x 223 mm |
| Indoor Unit Weight | 8.5 kg |
| Type | Wall Mounted |
| Power Supply | 220-240V, 50Hz |
Provides visual and dimensional details of the indoor unit from various views.
Details the dimensions and mounting points for installation plates of different models.
Outlines crucial safety advice for installation and operation, including warnings and important notes.
Informs about the proper disposal of the product and its components according to regulations.
Shows installation clearances, piping connection diagrams, and air purging steps.
Details how to install the mounting plate and attach the indoor unit to it.
Provides guidelines for correct water drainage pipe installation to prevent leaks.
Explains water inlet/outlet connections, valve requirements, and piping materials.
Covers wiring to the controller, jumper settings, and model-specific electrical data.
Explains IR signal receiver response and beep indications for remote control signals.
Details the meaning of LED indicator lights for normal operation and fault conditions.
Explains Dry mode, Heat mode, airflow adjustment, and fan speed impact on capacity.
Details how to adjust flap and louver angles using the remote control.
Specifies the operational limits for water and air temperatures in cooling and heating modes.
Step-by-step instructions for cleaning and replacing air filters.
Covers cleaning the indoor unit and procedures for removing/attaching the front panel.
Outlines steps for preparing the unit for long-term non-use.
Lists common faults, causes, and actions for diagnosing and resolving unit problems.
Lists cooling capacity, heating capacity, power input, and sound levels for various models.
