EasyManua.ls Logo

Daikin FXAQ-MAVE - Wiring Diagram; Wiring Diagram for Indoor Unit

Daikin FXAQ-MAVE
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
•VRV
®
Systems • Indoor Units
13
Indoor Units • WALL MOUNTED UNIT • FXAQ-MAVE
8 Wiring diagram
8 - 1 Wiring diagram
FXAQ-MA
3D034206C
220-240V
~
50Hz
220V
~
60Hz
Power supply
Control Box
(Indoor unit)
FrontSide
Receiver/display unit
(Infrared remote control)
Note 5
Note 5
Note 2
Note 1
Input from outside
Transmission wiring
Central remote control
Wired remote control
NOTES
1 In case of using central remote control, connect it to the unit in accordance with the attached installation manual.
2 When connecting the input wires from outside, forced off or on/off control operation can be selected by remote control. In details, refer to the installation manual atached the unit..
3 Remote control model varies according to the combination system. Confirm engineering data and catalogs, etc.. before connecting.
4 Confirm the method of setting the selector switch (SS1, SS2) of wired remote control and infrared remote control by installation manual and engineering data, etc.
5 X24A is connected when the infrared remote control kit is being used.
Indoor Unit
A1P Printed circuit board Y1E Electronic expansion valve SS1 Selector switch (Main/sub)
F1U Fuse ( , 3A, 250V) PC Power Circuit SS2 Selector switch (Wireless adress set)
HAP Light emitting diode (Service monitor-green) Receiver/display unit (Attached to infrared remote control)
M1F Motor (Indoor fan) A2P Printed circuit board Wired remote control
M1S Motor (Swing flap) A3P Printed circuit board R1T Thermistor (Air)
R1T Thermistor (Air) BS1 Push button (On/off) SS1 Selector switch (Main/sub)
R2T Thermistor (Coil liquid pipe) H1P Light emitting dide (On-red)
R3T Thermistor (Coil gas pipe) H2P Light emitting diode (Timer green) Connector for optional parts
X1M Terminal block (Control) H3P Light emitting diode (Filter sign-red) X15A Connector (Float switch)
X2M Terminal block (Power) H4P Light emitting diode (Defrost-orange) X35A Connector (Group control adapter)
COLORS : BLK : Black PNK : Pink
BLU : Blue RED : Red
BRN : Brown WHT : White
GRN : Green YLW : Yellow
ORG : Orange
: Terminal
: Connector
: Shows short circuit connector
: Field wiring
,

Related product manuals