Daikin FXSQ-A - Page 31

ESIE15-11A | Part 3. Field settings 4. Wired remote controller BRC1E51
23/09/16 Page 31
VRV4 indoor units
5. Highlight SECOND CODE NO. of the
FIRST CODE NO. to be changed, and
select desired “SECOND CODE NO.”
by using  (Up/Down) button.
Multiple identical mode number settings
are available.
(In the case of group setting, all of
SECOND CODE NO. which may be set
are displayed as " * ". " * " is changed to
SECOND CODE NO. to be set. And,
SECOND CODE NO. " - " means no
function.)
6. Press Menu/Enter button. Setting
confirmation screen is displayed.
7. Select Yes and press Menu/Enter
button. Setting details are saved and
Field settings screen returns.
8. In the case of multiple setting changes,
repeat step "3" to "7".
9. After all setting changes are completed,
press Cancel button twice.
10. Backlight goes out, and "Checking the
connection Please stand by" is
displayed during initialization. After the
initialization, the basic screen returns.
CAUTION
• When an optional accessory is installed on the indoor unit, settings of the indoor unit may be changed. See the
manual of the optional accessory.
• For field setting details of the outdoor unit, see installation manual attached to the outdoor unit.
Field Settings
Unit No.
0
Mode
20
SettingReturn
Field Settings
Mode
10
SettingReturn
SECOND CODE NO.
<Field settings screen>
FIRST CODE (SW) NO.
In the case of group settingIn the case of individual
setting per indoor unit
3.
4.
5.
3.
5.
Press the Menu/Enter button.
Press the Menu/Enter button.
<Setting confirmation screen>
NoYes
Field Settings
Save the settings?
SettingReturn
Setting confirmation
6.
7.