Need help?Do you have a question about the Daikin intelligent Touch Manager DCM601B71 and is the answer not in the manual?
General| Brand | Daikin |
|---|---|
| Model | intelligent Touch Manager DCM601B71 |
| Category | Touch Panel |
| Language | English |
FCC Part 15 compliance and warnings for users in the USA.
Canadian ICES-003 compliance statement for users in Canada.
Explains the meaning of warning, caution, and note symbols used in the manual.
Outlines critical safety precautions for qualified personnel during installation.
Details precautions against water, electrical shock, and environmental hazards.
Describes the process of mounting the unit directly to a wall using a metal plate.
Details embedding the unit into the wall using frame and angle brackets.
Explains how to mount the unit directly onto a control enclosure.
Verifies that all necessary accessories are included and the unit is ready for installation.
Displays physical dimensions of the intelligent Touch Manager body and mounting plate.
Identifies various terminals and switches on the rear and front panels of the unit.
Specifies ideal locations, environmental conditions, and required clearances for installation.
Details procedures for connecting the unit to power, networks, and other equipment.
Instructions for connecting the unit to its power supply, including terminal details.
Instructions to enable the internal battery for retaining settings during power loss.
Guide on powering on the intelligent Touch Manager and connected air conditioners.
Configuration of date/time format, temperature units, and decimal point settings.
Selection of the local standard time zone for the system clock.
Adjusting the current time and configuring daylight saving time schedules.
Verifying the results of automatic registration for connected air conditioners.
Procedures for setting DIII-NET addresses for individual air conditioners.
Instructions for viewing area and management point information in list format.
Navigating through areas and management points on the display.
Procedures for starting or stopping operation of selected areas or points.
To Next Page
