Daikin LXE10E-A32A - Page 8

73-7
Check on settings and operation conditions
※1. Current indication mode (indication of operation conditions)
Page 3-9
Indicates the unit operation conditions.
●Supply air temperature (SS)
●Return air temperature (RS)
●Defrost interval
●Alarm
● Setting point humidity and humidity (OPTION)
※2. Operation setting mode
Page 3-10
Settings for cargo transportation
●Temperature settings
●Defrost interval settings
●Humidity settings (optional)
※3. Battery mode (settings for operation conditions by using the battery)
Page 3-11
Setting can be executed when
commercial power supply is not available.
●Temperature display
●Humidity settings
●Defrost interval settings
●Unit ON/OFF setting
※4. Mode operation
Page 3-12
q G-Set : The maximum power consumption can be set in case of
operation by generation.
w Automatic pump down : The pump down can be executed automatically.
e Mode Operation : Dehumidification mode can be set.
Test mode can be set.
●Fresh air quantity (FA) display
●Temperature settings
※5. LED display off mode
Page 3-14
LED display section on the controller can
be turned off.
●LED lights off
01-14LXE10E-A32A,BSG.qx08.1.2410:15AMページ7
https://daikin-p.ru