operaTIon
www.DaikinApplied.com 31 IOM 1266-2 • MAGNITUDE
®
MODEL WME CHILLERS
The Compressor State Information on the right side of the
screen is a compilation of events the chiller sequences through
at startup. A green light indicates that a particular sequence
requirement has been satised. It is recommended that this
information be viewed during the startup sequence. One
can see the requirements light up as they are met and also
determine why a non-start may have occurred. Similarly during
the shut down process, the sequence transitions back to "Off"
and the highlight color will switch to black.
The left-side information displays the status of the compressor
in greater detail than on the Home Detail screen (Figure 32).
Compressor related setpoint adjustments can be made within
the Settings screen on the Modes and Motor tabs.
Figure 36: Condenser Information
Figure 37: Expansion Valve Information
To Next Page
Loading...
