What to do if Clean monitor (Dust) is red on Daikin Air Cleaner?
If the Clean monitor (Dust) on your Daikin Air Cleaner is red and doesn't change, it's likely due to dust clogging the dust sensor. Use the nozzle attachment of an electric vacuum cleaner to remove dust from the dust sensor air intake. After removing the dust, operate the unit manually for about half a day to restore it to normal.
Why is my Daikin MC704VM not cleaning properly?
If your Daikin Air Cleaner isn't cleaning effectively, it might be due to an obstruction near the unit or improper airflow. Try removing any obstructions that might be blocking the airflow. Also, check the pre-filter or filter roll for excessive dust and clean or replace them as needed.
Why does my Daikin MC704VM Air Cleaner smell?
If you notice an odor coming from the air outlet of your Daikin Air Cleaner, it could be due to a large amount of odor being generated temporarily, such as from smoking or grilling. In this case, the odor should gradually disappear with continued operation. Alternatively, the pre-filter or plasma ionizer might be dirty. Try cleaning these components.
What to do if my Daikin MC704VM Air Cleaner does not turn on?
If your Daikin Air Cleaner is not operating, ensure that it is securely inserted and set. Also, check the remote controller's batteries and replace them if they are dead.
How to fix a distorted TV screen caused by my Daikin MC704VM?
If your television screen is distorted when the Daikin Air Cleaner is running, it might be due to the proximity of the devices. Ensure that the television, radio, and indoor antenna are at least 2 meters away from the air cleaner. Also, keep the power cord and antenna of the television or radio as far away from the air cleaner as possible.
General| Brand | Daikin |
|---|---|
| Model | MC704VM |
| Category | Air Cleaner |
| Language | English |
Covers remote controller setup, storage, usage, and battery replacement.
Detailed steps for cutting, inserting, and storing the filter roll.
Instructions for installing the plasma ionizer and mounting the front panel.
Specifies indoor temperature and humidity conditions for proper operation.
Covers turning the unit on/off and manually adjusting airflow rates.
Details on using Turbo, Anti-Pollen, and Negative Ion modes.
Instructions for setting the operation timer and adjusting display brightness.
Enabling child lock and operating the unit via main unit buttons.
Instructions for removing, cleaning, and reinstalling the pre-filter.
Procedure for replacing the filter roll when the indicator is lit.
Steps for cleaning the plasma ionizer when the clean indicator flashes.
Maintenance for the front panel and the dust sensor intake.
To Next Page
