5 | Maintenance
Service manual
216
RXM20~71R + ARXM25~71R + FTXM20~71R + ATXM25~50R +
FVXM25~50A
Split New Perfera R32
ESIE20-11 – 2021.01
NOTICE
▪ Do NOT use gasoline, benzene, thinner polishing powder or liquid insecticide.
Possible consequence: Discoloration and deformation.
▪ Do NOT use water or air of 50°C or higher. Possible consequence: Discoloration
and deformation.
▪ Do NOT scrub firmly when washing the blade with water. Possible consequence:
The surface sealing peels off.
You can remove the front panel to clean it.
CAUTION
Be careful when opening and handling the front panel; sharp edge of the front panel
may cause injury.
1 Slide both sliders in the direction of the arrows until they click.
2 Open the front panel and undo the string.
3 Remove the front panel.
4 Wipe it with a soft cloth soaked in water.
5 Let it dry in the shade after washing.
6 To reinstall and close the front panel, see "3.14Plate work"[4151].
Wall mounted units
7 Clean the front panel with a soft cloth. If it is difficult to remove stains, use
water or a neutral detergent.
5.6 To clean the air filters
Floor standing units
REMOVE THE FILTER
To Next Page
Loading...
