3 | Components
Service manual
157
RXM20~71R + ARXM25~71R + FTXM20~71R + ATXM25~50R +
FVXM25~50A
Split New Perfera R32
ESIE20-11 – 2021.01
2 Open the front panel and remove the string.
3 Remove the front panel.
Wall mounted units
1 Hold the front panel by the panel tabs on both sides and open it.
2 Remove the front panel by sliding it to the left or the right and pulling it
toward you.
Result: The front panel shaft on 1 side will be disconnected.
3 Disconnect the front panel shaft on the other side in the same manner.
a Front panel shaft
To remove the front grille
Floor standing units
1 Remove the front panel. See "3.14Plate work"[4151].
2 Remove the 4 screws, remove the grille from 4 tabs on the top and remove
the front grille while pulling it toward you.