3 | Components
Service manual
156
RXM20~71R + ARXM25~71R + FTXM20~71R + ATXM25~50R +
FVXM25~50A
Split New Perfera R32
ESIE20-11 – 2021.01
a Cable tie
b Switch box
7 Install the insulation on the upper side of the switch box.
a Insulation
b Main PCB
3.14.2 Indoor unit
To remove the front panel
DANGER: RISK OF ELECTROCUTION
Wait for at least 10 minutes after the circuit breaker has been turned OFF, to be sure
the rectifier voltage is below 10VDC before proceeding.
Floor standing units
1 Slide both sliders in the direction of the arrows until they click.