5 Operation
Operation manual
11
CTXM15+FTXM20~42R5V1B + CTXM15+FTXM20~71R2V1B
Daikin room air conditioner
3P485919-11S – 2020.06
5 Press .
Result: The OFF/ON timer mode is set. and the time
blink.
Note: Press to return to the previous screen. If blank is
selected, continue to step 9.
6 Press or to select the time. The time can be set
between 0:00~23:50 in 10-minute intervals.
7 Press .
Result: The time is set and and the temperature
blink.
Note: Press to return to the previous screen. If OFF timer
is selected, continue to step 9.
8 Press or to select the desired temperature.
Note: The set temperature for the weekly timer is displayed only
when setting the weekly timer mode.
INFORMATION
The temperature can be set between 10~32°C on the user
interface, however:
▪ in cooling and automatic operation mode, the unit will
operate at minimum 18°C even if is set at 10~17°C;
▪ in heating and automatic operation mode, the unit will
operate at maximum 30°C even if is set at 31~32°C.
9 Press .
Result: The temperature and time are set for the ON timer. The
time is set for the OFF timer. The timer lamp lights orange.
Result: A new reservation screen will appear.
10 Repeat the previous procedure to set another reservation or
press to complete the setting.
Result: is displayed on the LCD.
Note: A reservation can be copied with the same settings to another
day. Refer to "5.10.2To copy reservations"[411].
5.10.2 To copy reservations
A reservation can be copied to another day. The complete
reservation of the selected day of the week will be copied.
1 Press .
2 Press or to select the day of the week to be copied.
3 Press .
Result: The reservation of the selected day of the week will be
copied.
4 Press or to select the destination day.
5 Press .
Result: The whole reservation is copied to the selected day and the
timer lamp lights orange.
Note: To copy to another day, repeat the procedure.
6 Press to complete the setting.
Result: is displayed on the LCD.
Note: To change the reservation setting after copying, refer to
"5.10.1To set Weekly timer operation"[410].
5.10.3 To confirm reservations
You can confirm if all reservations are set to your needs.
1 Press .
Result: The day of the week and the reservation number of the
current day are displayed.
2 Press or to select the day of the week and reservation
number to be confirmed and check the reservation details.
Note: To change the reservation setting, refer to "5.10.1 To set
Weekly timer operation"[410].
3 Press to exit the confirmation mode.
5.10.4 To deactivate and reactivate Weekly timer
operation
1 To deactivate the Weekly timer, press while
is displayed on the LCD.
Result: disappears from the LCD and the timer lamp goes
off.
2 To reactivate the Weekly timer, press again.
Result: The last set reservation mode will be used.
5.10.5 To delete reservations
To delete individual reservations
Use this function if you want to delete a single reservation setting.
1 Press .
Result: The day of the week and the reservation number are
displayed.
2 Press or to select the day of the week to be deleted.
3 Press .
Result: , , and blink.
4 Press or and select "blank".
Result: The setting will change as follows:
5 Press .
Result: The selected reservation is deleted.
6 Press to exit.