RCS Equipment Warranty Registration Form (continued)
13F-4155 (02/16) 3
Select Yes or No. If not applicable to the type of unit, select N/A.
F. Suction pressure, one compressor: . . . . . . . . . . . . . . . . . . . . . . Circuit 1 __________ psig Circuit 2 __________ psig
Suction pressure, fully loaded, 2–3 compressors: . . . . . . . . . . . . . . . Circuit 1 __________ psig Circuit 2 __________ psig
Liquid press, fully loaded, 2–3 compressors (at liquid line shuto valve): . . . Circuit 1 __________ psig Circuit 2 __________ psig
Liquid temperature, fully loaded, 2–3 compressors: . . . . . . . . . . . . . . Circuit 1 __________ psig Circuit 2 __________ psig
Circuit 1 Circuit 2
G. Suction line temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ____________ °F ____________°F
H. Superheat: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ____________ °F ____________°F
I. Subcooling:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ____________ °F ____________°F
J. Is the liquid in the line sightglass clear and dry? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes No N/A
K. Does the hot gas bypass valve function properly?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes No N/A
L. At what suction pressure does the hot gas bypass valve open?. . . . . . . . Circuit 1 __________ psig Circuit 2 __________ psig
M. Record discharge air temperature at discharge of unit: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ___________ °F
N. Are all control lines secure to prevent excessive vibration and wear? . . . . . . . . . . . . . . . . . . . . . Yes No N/A
O. Are all gauges shut o and valve caps and packings tight after start-up? . . . . . . . . . . . . . . . . . . . Yes No N/A
Thank you for completing this form. Please sign and date below.
Signature _____________________________________________________________ Startup date: ___________________________
Return completed form by mail to:
Daikin Warranty Department, 13600 Industrial Park Boulevard, Minneapolis, MN 55441
or by email to: AAH.Wty_WAR_forms@daikinapplied.com
Please ll out the Daikin Applied “Quality Assurance Survey Report” and list any additional comments that could a ect the operation of this unit; e.g., shipping damage, failed
components, adverse installation applications, etc. If additional comment space is needed, write the comment(s) on a separate sheet, attach it to the Survey Report and return it to
the Warranty Department of Daikin Applied with the completed Equipment Warranty Registration form.
www.DaikinApplied.com 33 IM 962-4 • AIR-COOLED SPLIT SYSTEM CONDENSERS
To Next Page
Loading...
Need help?
General
